It’s no secret that the accreditation system surrounding access control is confusing. For sure, CE marking guarantees that such products are designed, tested and approved according to harmonised standards. In truth, however, the legal requirements and compulsory certification processes for the access control industry are difficult to understand, at best.
Moreover, access to such information is hard to locate. There is no simple, clear, easy to understand knowledge base to which one can refer. The issue is widespread and embedded deep within the industry. Specifiers, designers, main contractors and even door manufacturers have varying interpretations of the laws and regulations surrounding the access control industry. Often, the stance taken by an organisation is based on opinions rather than facts.
Given the recent terrible and heart-breaking disasters at Grenfell Tower in London and Cameron House Hotel in Scotland, it is imperative that this industry wide knowledge gap is bridged as a matter of urgency. TLJ have produced this white paper with the aim of addressing this issue.
CE Marking is a way of placing a product on the European market and having a barrier free trade and to demonstrate that products comply with relevant regulations on health, safety and environmental protection legislation and the essential characteristics of the harmonised standards.
Products that meet the essential characteristics are marked with the ‘CE’ logo, showing they conform to one or more of the requirements given in the harmonised (hENs) Annex ZA. These are the essential requirements, performance levels and testing requirements to which products must conform to carry the CE mark.
CE product Certification is carried out by a Notified Body (such as Exova Warrington Certification) who, in the event of successful testing, Factory Production Control, will verify the product meets the specific technical requirements and essential characteristics, and then issue a CE marking certificate for AVCP level 1 products. It is the manufacturer’s responsibility to compile and maintain a technical dossier containing test documentation and produce a Declaration of Performance (DoP).
If a construction product falls under at least one of the directives then having the test data is mandatory, under the relevant harmonised standard(s). Products must conform to those requirements of the harmonised standard to qualify for CE Marking; if not, the product cannot be sold legally in participating countries.
If a manufacturer falsely CE marks a product or fails to CE mark a product for which it is required, the director of the offending company is liable to prosecution.
Fire Test, performed by an official, independent test laboratory, following prescribed protocols. It must be evidenced that a complete door set, fitted with access control, can sustain 30 minutes resistance to fire whilst maintaining structural stability and integrity.
The door set must be fire tested from both sides of the door, resisting failure for at least 30 minutes on each side of the door. This ‘double sided’ aspect of the test is often overlooked.
Mechanical cycle test for electromechanically operated locks, performed by an official, independent test laboratory. Standard testing protocols are followed, covering nine operational aspects of the lock. Each test involves a minimum of 50,000 operations. To maintain certification, testing must be performed at least annually.
Factory Production Control (FPC)
FPC involves the Notified Body (such as Exova Warrington Certification) visiting the factory and auditing the manufacturing process. Every stage of production is examined, through traceability of production batches to management procedures. The visits must be performed annually.
The access control hardware tested in both the mechanical cycle testing and fire testing phases must be ‘sampled’. This means they must be chosen, at random, from working stock at the manufacturing site. This generally takes place during the Factory Production Control visit by the Notified Body. It ensures the sample selection is totally impartial, free from any possible influence or manipulation by the manufacturer. It also ensures that the samples are a true representation of those used in the field and helps confirm the ongoing production process can be maintained day to day.
At TLJ we have embraced the harmonised standards required to achieve CE Marking. The investment, rigour and discipline required to achieve the CE marking supports and validates our internal quality processes. We have total confidence that all lock hardware which falls under the standards is tested and approved according to the standards. Our CE Marking relates to two directives: CPR (EU Construction Product Regulation 305/2011) and LVD (Low Voltage Directive 2104/35/EU).
Trust is of the utmost importance when dealing with situations that can affect people’s lives, especially those that can endanger life. Consequently, it’s vital that customers trust our locks to meet, as a bare minimum, the harmonised standards. CE Marking provides the evidence that our locks can withstand adverse environmental conditions, such as fire, and that our production methods are of a consistently high standard.
While CE Marking might seem a simple concept, the devil is very much in the detail. As part of any due diligence process, we recommend that any specifier asks their supplier to demonstrate proof of CE marking (request a DoP) the testing and certification, as a matter of urgency.
The consequences of not doing so are manifold. First and foremost is the moral obligation to provide a safe environment for guests, residents and all users of the building. Liability to prosecution, including a fine and jail term for company directors, is an additional and very real risk to any organisation failing to carry out sufficient due diligence. Finally, the reputational damage to a company caught up in an incident involving breach of European Directives could be catastrophic in these days of 24-hour news and all-pervasive social media.
As we have seen, the route to obtaining relevant CE Marking can be a complicated one. TLJ have successfully navigated the process, and we hold the technical competencies and expertise to offer advice and training to manufacturers of doors, specifiers, contractors and operators in this area.
If you feel you may benefit from some training or advice, please contact our Technical Team to register your interest on 01482 830334 or email us at email@example.com
Whilst we cannot promise another Grenfell will never happen, it pays to have a thorough, working knowledge of current regulatory standards. CE Marking provides a robust framework in which to achieve this. We firmly believe that ignorance is never bliss.
We have collaborated with Paul Duggan, Certification Manager at Warrington Certification, in respect of meeting our CE Marking requirements as well as Nathan Pilsbury, the Exova Hardware Laboratory Manager in Wednesbury, who assisted TLJ to ensure our testing regime met the stringent requirements in support of the certification.